Magnetic resonance imaging-based classification of the myodural bridge complex and its influencing factors.

Cerebrospinal fluid (CSF) circulation is considered the third circulation of the human body. Recently, some scholars have proposed the myodural bridge (MDB) as a novel power source for CSF flow. Moreover, the suboccipital muscles can exert a driving force on the CSF via the MDB. This hypothesis is directly supported by head rotation and nodding movements, which can affect CSF circulation. The MDB has been validated as a normal structure in humans and mammals. In addition, the fusion of MDB fibers of different origins that act in concert with each other forms the MDB complex (MDBC). The MDBC may be associated with several CSF disorder-related neurological disorders in clinical practice. Therefore, the morphology of the MDBC and its influencing factors must be determined. In this study, T2-weighted imaging sagittal images of the cervical region were analyzed retrospectively in 1085 patients, and magnetic resonance imaging (MRI) typing of the MDBC was performed according to the imaging features of the MDBC in the posterior atlanto-occipital interspace (PAOiS) and posterior atlanto-axial interspace (PAAiS). The effects of age and age-related degenerative changes in the cervical spine on MRI staging of the MDBC were also determined. The results revealed four MRI types of the MDBC: type A (no MDBC hyposignal shadow connected to the dura mater in either the PAOiS or PAAiS), type B (MDBC hyposignal shadow connected to the dura mater in the PAOiS only), type C (MDBC hyposignal shadow connected to the dura mater in the PAAiS only), and type D (MDBC hyposignal shadow connected to the dura mater in both the PAOiS and PAAiS). The influencing factors for the MDBC typing were age (group), degree of intervertebral space stenosis, dorsal osteophytosis, and degenerative changes in the cervical spine (P < 0.05). With increasing age (10-year interval), the incidence of type B MDBC markedly decreased, whereas that of type A MDBC increased considerably. With the deepening of the degree of intervertebral space stenosis, the incidence of type C MDBC increased significantly, whereas that of type A MDBC decreased. In the presence of dorsal osteophytosis, the incidence of type C and D MDBCs significantly decreased, whereas that of type A increased. In the presence of protrusion of the intervertebral disc, the incidence of type B, C, and D MDBCs increased markedly, whereas that of type A MDBC decreased considerably, with cervical degenerative changes combined with spinal canal stenosis. Moreover, the incidence of both type C and D MDBCs increased, whereas that of type A MDBC decreased. Based on the MRI signal characteristics of the dural side of the MDBC, four types of the MDBC were identified. MDBC typing varies dynamically according to population distribution, depending on age and cervical degeneration (degree of intervertebral space stenosis, vertebral dorsal osteophytosis formation, simple protrusion of intervertebral disc, and cervical degeneration changes combined with spinal canal stenosis, except for the degree of protrusion of the intervertebral disc and the degree of spinal canal stenosis); however, it is not influenced by sex.

Computed Tomography-Based Morphometric Analysis of Lower Cervical Anterior Transpedicular Screw Fixation and Related Factors in the Chinese Population.

BACKGROUND: Anterior transpedicular screw (ATPS) internal fixation of the lower cervical spine is an alternative for patients who cannot tolerate combined anterior and posterior surgery. The cervical vertebral anatomy varies with many factors, including age, gender, height, weight, and race. METHODS: Three-dimensional (3D) CT reconstructions were performed on 122 patients. We selected the best level and measured the relevant parameters on both sides of the cervical vertebrae. RESULTS: We identified the entry point and orientation parameters of ATPS fixation for the C3-C7 vertebrae, and analyzed cervical pedicle parameters. Outer pedicle width (OPW), outer pedicle height (OPH), and pedicle axis length (PAL) were not correlated with body weight and age, but were positively correlated with body height (P < 0.05). After multiple linear regression analysis to exclude the effects of body height, no significant differences in OPW, OPH, and PAL were found between male and female subjects at most cervical levels. Pedicle cortical thickness was negatively correlated with age (P < 0.05). The percentage of pedicles with OPW <4.5 mm was: C3, 38.10%; C4, 34.92%; C5, 12.70%; C6, 9.52%; and C7, 0%. The percentage of pedicles with OPWs ≤4.5 mm, ≤4.0 mm, and ≤3.5 mm was higher among subjects with body height <160 cm. CONCLUSIONS: This study presents the internal anatomy of the cervical spine and provides accurate preoperative evaluation data for ATPS fixation. OPW, OPH, and PAL are positively correlated with body height, while pedicle cortical thickness is negatively correlated with age.

Reinterpretation of tuberculate cervical vertebrae of Eocene birds as an exceptional anti-predator adaptation against the mammalian craniocervical killing bite.

We report avian cervical vertebrae from the Quercy fissure fillings in France, which are densely covered with villi-like tubercles. Two of these vertebrae stem from a late Eocene site, another lacks exact stratigraphic data. Similar cervical vertebrae occur in avian species from Eocene fossils sites in Germany and the United Kingdom, but the new fossils are the only three-dimensionally preserved vertebrae with pronounced surface sculpturing. So far, the evolutionary significance of this highly bizarre morphology, which is unknown from extant birds, remained elusive, and even a pathological origin was considered. We note the occurrence of similar structures on the skull of the extant African rodent Lophiomys and detail that the tubercles represent true osteological features and characterize a distinctive clade of Eocene birds (Perplexicervicidae). Micro-computed tomography (µCT) shows the tubercles to be associated with osteosclerosis of the cervical vertebrae, which have a very thick cortex and much fewer trabecles and pneumatic spaces than the cervicals of most extant birds aside from some specialized divers. This unusual morphology is likely to have served for strengthening the vertebral spine in the neck region, and we hypothesize that it represents an anti-predator adaptation against the craniocervical killing bite ("neck bite") that evolved in some groups of mammalian predators. Tuberculate vertebrae are only known from the Eocene of Central Europe, which featured a low predation pressure on birds during that geological epoch, as is evidenced by high numbers of flightless avian species. Strengthening of the cranialmost neck vertebrae would have mitigated attacks by smaller predators with weak bite forces, and we interpret these vertebral specializations as the first evidence of "internal bony armor" in birds.

Study on articular surface morphology of atlantoaxial lateral mass based on differential manifold.

OBJECTIVES: To propose a surface reconstruction algorithm based on a differential manifold (a space with local Euclidean space properties), which can be used for processing of clinical images and for modeling of the atlantoaxial joint. To describe the ideal anatomy of the lateral atlantoaxial articular surface by measuring the anatomical data. METHODS: Computed tomography data of 80 healthy subjects who underwent cervical spine examinations at our institution were collected between October 2019 and June 2022, including 46 males and 34 females, aged 37.8 ± 5.1 years (28-59 years). A differential manifold surface reconstruction algorithm was used to generate the model based on DICOM data derived by Vision PACS system. The lateral mass articular surface was measured and compared in terms of its sagittal diameter, transverse diameter, articular surface area, articular curvature and joint space height. RESULTS: There was no statistically significant difference between left and right sides of the measured data in normal adults (P > 0.05). The atlantoaxial articular surface sagittal diameter length was (15.83 ± 1.85) and (16.22 ± 1.57) mm on average, respectively. The transverse diameter length of the articular surface was (16.29 ± 2.16) and (16.49 ± 1.84) mm. The lateral articular surface area was (166.53 ± 7.69) and (174.48 ± 6.73) mm2 and the curvature was (164.03 ± 5.27) and (153.23 ± 9.03)°, respectively. The joint space height was 3.05 ± 0.11mm, respectively. There is an irregular articular space in the lateral mass of atlantoaxial, and both upper and lower surfaces of the articular space are concave. A sagittal plane view shows that the inferior articular surface of the atlas is mainly concave above; however, the superior articular surface of the axis is mainly convex above. In the coronal plane, the inferior articular surface of the atlas is mostly concave above, with most concave vertices located in the medial region, and the superior articular surface of the axis is mainly concave below, with most convex vertices located centrally and laterally. CONCLUSION: A differential manifold algorithm can effectively process atlantoaxial imaging data, fit and control mesh topology, and reconstruct curved surfaces to meet clinical measurement applications with high accuracy and efficiency; the articular surface of the lateral mass of atlantoaxial mass in normal adults has relatively constant sagittal diameter, transverse diameter and area. The distance difference between joint spaces is small, but the shape difference of articular surfaces differs greatly.

A novel radiographic analysis system for subaxial cervical spine pedicle screw placement.

BACKGROUND: Precise pedicle screw placement of the subaxial cervical spine is difficult. Not every hospital is equipped with a guidance system that can provide effective help. Computed tomography (CT) scanning is almost a routine preoperative examination for cervical spine surgery in all hospitals. Appropriate measurement and analysis of the CT images could assist optimal cervical pedicle screw placement. The purpose of this study is to propose a new and universal method using computed tomography (CT) morphological parameters analysis to assist optimal cervical pedicle screw placement from C3 to C7. METHODS: A localization system with six parameters was designed based on preoperative CT reconstruction to guide subaxial cervical spine pedicle screw placement. The six parameters were distance from the starting point to the midline [D1], distance from the starting point to the lower edge of the inferior articular process [D2], transverse section angle [TSA], sagittal section angle [SSA], pedicle width [PW], and pedicle height [PH]. The six parameters were analyzed in 53 participants. RESULTS: Combining D1 and D2 could localize the entrance of the pedicle screw, and we concluded that D1 and TSA and D2 and SSA could be a new standard for determination of the transverse and sagittal orientation of the pedicle screw. The six parameters were closely related to the patient's gender, height, and weight. PH and PW were linearly correlated and could guide selection of the appropriate pedicle screw. SSA was an independent parameter of the relevant vertebral body, and changes in SSA had nothing to do with the curvature or posture of the cervical spine. CONCLUSIONS: Understanding and applying the six-parameter localization system are essential for achieving accurate and optimal pedicle screw placement in subaxial cervical spine, regardless of cervical sagittal alignment.

Evaluation of Head and Cervical Spine Posture after Therapy with Maxillary Protraction Appliances / Evaluación de la Postura de la Cabeza y la Columna Cervical Después de la Terapia con Aparatos de Protracción Maxilar

SUMMARY: The objective of this study was to evaluate the changes of head and cervical spine posture of skeletal class malocclusion in adolescent with maxillary protraction. Thirty cases of skeletal class malocclusion were randomly selected from the Stomatological Hospital of Shanxi Medical University. High-quality lateral cephalograms were collected including pre- and posttreatment to compare the changes of head and cervical spine posture. Data were processed using SPSS 26.0 statistical software. The paired-t test was used to compare pre- and posttreatment mean angular measurements.A significant difference in the SNA(p<0.001), SNB(p<0.01), and ANB(p<0.001) between T1 and T2 showed an improvement in the sagittal relationships. A significant change was observed in middle cervical spine posture, while upper cervical spine posture variables showed no significant difference after treatment. Skeletal class with maxillary protraction appliance not only led to the improvement of sagittal relationship, but also changed the middle cervical spine posture.

El objetivo de este estudio fue evaluar los cambios en la postura de la cabeza y la columna cervical debido a la maloclusión clase esquelética en adolescentes con protracción maxilar. Treinta casos de maloclusión de clase esquelética fueron seleccionados al azar del Hospital Estomatológico de la Universidad Médica de Shanxi. Se recogieron cefalogramas laterales de alta calidad, incluidos el tratamiento previo y posterior, para comparar los cambios en la postura de la cabeza y la columna cervical. Los datos se procesaron con el software estadístico SPSS 26.0. Se utilizó la prueba t pareada para comparar las medidas angulares medias antes y después del tratamiento. Una diferencia significativa en SNA (p <0,001), SNB (p <0,01) y ANB (p <0,001) entre T1 y T2 mostró una mejora en las relaciones sagitales. Se observó un cambio significativo en la postura de la columna cervical media, mientras que las variables de postura de la columna cervical superior no mostraron diferencias significativas después del tratamiento. La clase esquelética con aparato de protracción maxilar no solo condujo a la mejora de la relación sagital, sino que también cambió la postura de la columna cervical media.

An anatomical study of the suboccipital cavernous sinus and its relationship with the myodural bridge complex.

The suboccipital cavernous sinus (SCS) and the myodural bridge complex (MDBC) are both located in the suboccipital region. The SCS is regarded as a route for venous intracranial outflow and is often encountered during surgery. The MDBC consists of the suboccipital muscles, nuchal ligament, and myodural bridge and could be a power source for cerebrospinal fluid circulation. Intracranial pressure depends on intracranial blood volume and the cerebrospinal fluid. Since the SCS and MDBC have similar anatomical locations and functions, the aim of the present study was to reveal the relationships between them and the detailed anatomical characteristics of the SCS. The study involved gross dissection, histological staining, P45 plastination, and three-dimensional visualization techniques. The SCS consists of many small venous sinuses enclosed within a thin fibrous membrane that is strengthened by a fibrous arch closing the vertebral artery groove. The venous vessels are more abundant in the lateral and medial portions of the SCS than the middle portion. The middle and medial portions of the SCS are covered by the MDBC. Type I collagen fibers arranged in parallel and originating from the MDBC terminate on the SCS either directly or indirectly via the fibrous arch. The morphological features of SCS revealed in this research could serve as an anatomical basis for upper neck surgical procedures. There are parallel arrangements of type I collagen fibers between the MDBC and the SCS. The MDBC could change the blood volume in the SCS by pulling its wall during the head movement.

Morphology analysis of the C2 pediculoisthmic component and feasibility of safe C2 pedicle screw placement: comparison of multiplanar reconstruction versus traditional radiographic methods.

BACKGROUND: Preoperatively evaluating the feasibility of safe C2 pedicle screw placement is the key to avoiding iatrogenic vertebral artery injury. However, it has not been verified whether the conventional CT measurements of C2 pediculoisthmic component (PIC) are reliable and accurate, and the results may lack validity. The purpose of this study is to analyze the evaluative performance of conventional CT measurements and to create an accurate predictor of morphometrics of C2 PIC. METHODS: A total of 304 C2 PICs were measured in 152 consecutive patients who underwent CT examination of the cervical spine between April 2020 and December 2020. We obtained the morphometric parameters of C2 PIC by measuring minimum PIC diameter (MPD) in CT multiplanar reconstruction versus conventional measurements of transverse PIC width (TPW), oblique PIC width (OPW) and definition of high-riding vertebral artery (HRVA). The outer diameter measured less than 4 mm in MPD was regarded as the standard of precluding safe C2 pedicle screw insertion. The evaluative performance of the conventional CT measurements was assessed, and the correlation between conventional CT measurements and measurements in CT multiplanar reconstruction was calculated. RESULTS: The parameters in OPW and MPD were measured significantly larger than those in TPW, and the preclusion of C2 pedicle screw placement evaluated from TPW and HRVA was significantly higher than that evaluated from OPW and MPD. The sensitivity of TPW was 93.09%, and the specificity was 79.31%. The sensitivity and specificity of OPW were 97.82% and 82.76%. The sensitivity of HRVA was 88.36%, and the specificity was 96.55%. Strong agreement with the highest correlation coefficient (0.879) and determination coefficient (0.7720) suggested that the outer diameter of OPW could be useful for the precise prediction of MPD. CONCLUSIONS: CT MPR allows accurate measurement of the narrowest section of the C2 PIC. The outer diameter of OPW could be simply measured and be useful for precise prediction of MPD, which makes C2 pedicle screw placement more safely than the conventional measurement of TPW and HRVA.

A new juvenile sauropod specimen from the Middle Jurassic Dongdaqiao Formation of East Tibet.

Jurassic strata are widely distributed in the eastern part of Tibet Autonomous Region, and have yielded many dinosaur bones. However, none of these specimens has been studied extensively, and some remain unprepared. Here we provide a detailed description of some new sauropod material, including several cervical vertebrae and a nearly complete scapula, recovered from the Middle Jurassic of Chaya County, East Tibet. The cervical vertebrae have short centra that bear ventral midline keels, as in many non-neosauropod sauropods such as Shunosaurus. Moreover, the cervical centra display deep lateral excavations, partitioned by a septum. The scapula has proximal and distal ends that are both expanded as in mamenchisaurids and neosauropods. However, relatively small body size and lack of fusion of neurocentral sutures in the cervical vertebrae suggest that the available material is from a juvenile, and the length of the cervical centra may have increased relative to the size of the rest of the skeleton in later ontogenetic stages. Phylogenetic analysis provides limited evidence that the new Tibetan sauropod specimen belongs to Eusauropoda, being more derived than Shunosaurus, but is basal to Mamenchisauridae. The new material provides important information on the morphological transition between Shunosaurus and mamenchisaurids, and extends the known biogeographic range of early-diverging sauropods in the Middle Jurassic of East Asia.

Morphometric Study of Sub Axial Cervical Spine Pedicles in Nepalese Population.

BACKGROUND: Mal-positioning of cervical screws risks neurovascular injury so, it is necessary to understand cervical pedicle morphology for pedicle screw fixation in the region. The risks of pedicle screw insertion in the cervical spine can be mitigated by a three-dimensional appreciation of pedicle anatomy. The study aims to determine the morphology of the sub axial cervical spine pedicles in Nepalese Population based on computerized tomography. METHODS: A cross-sectional study using computerized tomography scans of the spine was made among the randomly selected 87 patients who had visited National Trauma center, Kathmandu, Nepal with vertebral fracture other than cervical vertebrae. Patient was examined as per Advanced Trauma Life support protocol and neurological assessment. Measurement was done from the third cervical vertebra down to the seventh cervical vertebra in computer with standard software in the department of radiology from where all the computerized tomography scan reporting are done. RESULTS: The mean pedicle length ranged from 4.41 mm at C3 to 4.96 mm at C7 where mean pedicle height ranged from 4.64 at C3 to 5.12 at C7. Pedicle length, pedicle height and pedicle width were observed to be statistically significant with gender. The pedicle axial length of C3 and C7 vertebra were found significant with gender. All parameters were found to be greater in male compared to female. CONCLUSIONS: The study revealed that pedicle length, pedicle height, pedicle width, pedicle axial length increased from third to seventh cervical however, transverse angulation increased up to fifth vertebra and decreased to seventh vertebra.

Morphometric study and anatomical variation with its incidence of foramina transversaria on the lower cervical vertebrae / Estudio morfométrico y variación anatómica con la incidencia de forámenes transversos en las vértebras cervicales inferiores

SUMMARY: Anatomical variation of the foramina transversaria (FT) is associated with vertebral neurovascular symptoms and can cause complications after lower spine surgery, especially cervical pedicle screw (CPS) insertion. FT variation has been documented and classified in various populations, as this information can help increase cervical stability in subaxial vertebral surgery. Although the morphometry of the upper cervical spine in Thai populations has been reported, there have yet been no studies examining the features of FT. The FT of dried cervical spines (C3-C7; left and right side; n = 107, male = 53 and female = 54) were examined for morphological variation, and their anteroposterior (AP) and transverse (T) diameters were measured using a digital vernier caliper. Morphometric data and variations were compared by sex and lateral side. It was that the C3-C6 FT in both sexes were round, and the C7 FT was elliptical with an oblique right side. FT diameters did not differ significantly by sex except for the AP diameters of C6-C7 and for T diameters of C4 and C7. The left AP diameters of C3-C6 were significantly longer than the right, as were the T diameters of C4 and C7 FT. Additionally, T diameter was significantly longer than that of the AP, except that of the left C6 in male spines, which did not differ from the AP. Most FT examined were round. These findings should be considered in the provisional diagnosis of vertebral neurovascular symptoms caused by FT variation as well as that of neurovascular damage after cervical pedicle screw placement.

La variación anatómica del foramen transverso (FT) se asocia con síntomas neurovasculares vertebrales y puede causar complicaciones después de la cirugía de columna cervical inferior, especialmente la inserción de tornillos pediculares cervicales (TPC). La variación del FT se ha documentado y clasificado en varias poblaciones, ya que esta información puede ayudar a aumentar la estabilidad cervical en la cirugía vertebral subaxial. Aunque se ha informado sobre la morfometría de la columna cervical superior en poblaciones tailandesas, aún no se han realizado estudios que examinen las características de FT. Se examinó la variación morfológica del FT de vértebras cervicales secas (C3-C7; lado izquierdo y derecho; n = 107, hombres = 53 y mujeres = 54), y se midieron sus diámetros anteroposterior (AP) y transverso (T) usando un pie de metro digital. Se compararon datos morfométricos y variaciones por sexo y lado. Los FT de C3-a C6 en ambos sexos eran redondos, y el FT C7 era elíptico con el lado derecho oblicuo. Los diámetros del FT no difirieron significativamente por sexo excepto para los diámetros AP de C6- C7 y para los diámetros transversos de C4 y C7. Los diámetros AP izquierdos de C3-C6 eran significativamente más largos que los del lado derecho, al igual que los diámetros transversos de C4 y C7. Además, el diámetro transverso fue significativamente mayor que el AP, excepto el C6 izquierdo en las vértebras de hombres, que no difirió del AP. La mayoría de los FT examinados eran redondos. Estos hallazgos deben ser considerados en el diagnóstico provisional de síntomas neurovasculares vertebrales causados por la variación del FT, así como en el de daño neurovascular tras la colocación de tornillos pediculares cervicales.

Evaluation of the normal craniocervical junction craniometry in 137 asymptomatic patients / Evaluación de la craneometría de la unión craneocervical normal en 137 pacientes asintomáticos

SUMMARY: To our best knowledge, most of the craniometric studies on the normal craniocervical junction (CCJ), are still poorly studied and based on measurements taken from plain radiographs. In this study, the authors conducted a craniometric evaluation of the CCJ in a population without known CCJ abnormalities. The purpose of the study was to assess the normal CCJ craniometry based on measures obtained from CT scans. The authors examined 137 consecutive CCJ CT scans obtained in patients evaluated at their hospital for treatment of non-CCJ conditions between 2018 and 2019. Twelve craniometrical dimensions were conducted, including the relation of the odontoid with the cranial base, the atlantodental interval (ADI), the clivus length, and the clivus-canal angle (CCA).

Hasta donde sabemos, aun son escasos y pocos los estudios craneométricos respecto a la unión craneocervical normal (UCCN) y estos se basan en mediciones tomadas de radiografías simples. En este estudio, realizamos una evaluación craneométrica de la UCCN en una población sin anomalías conocidas. El propósito del estudio fue evaluar la craneometría UCCN normal en función de las medidas obtenidas de las tomografías computarizadas. Los autores examinaron 137 tomografías computarizadas UCCN consecutivas obtenidas en pacientes evaluados en su hospital para el tratamiento de condiciones no UCCN entre los años 2018 y 2019. Se realizaron doce dimensiones craneométricas, incluida la relación del proceso odontoides con la base del cráneo, el intervalo atlantodental (ADI), la longitud del clivus y el ángulo clivus-canal (CCA).

Identification of Deep Cervical Fascial Layers During Anterior Cervical Spine Exposure.

BACKGROUND: Anterior approaches to the cervical spine are among the most common exposures by which neurosurgeons and orthopedic surgeons access the prevertebral space and ultimately the cervical disk and vertebral bodies. There is a paucity of literature describing the microanatomic fascial planes of the neck with respect to anterior cervical approaches. OBJECTIVE: To delineate the microanatomic connections of the cervical fascial planes pertinent to anterior cervical exposure. METHODS: Using a cadaveric model, original illustrations, the Visible Human Project, and an original surgical video, we demonstrate a stepwise method for identifying the correct planes for anterior cervical exposure. RESULTS: A step-by-step method for identifying the anterior cervical fascial planes intraoperatively is demonstrated. CONCLUSION: A comprehensive understanding of anterior cervical microsurgical anatomy is vital for performing a methodical yet efficient approach to the prevertebral space while minimizing retraction and iatrogenic injury to the surrounding neurovascular structures.

Variation in Cervical Pedicle Morphology: Important Considerations for Posterior Cervical Procedures.

BACKGROUND: Safe posterior cervical spine surgery requires in-depth understanding of the surgical anatomy and common variations. The cervical pedicle attachment site to the vertebral body (VB) affects the location of exiting nerve roots and warrants preoperative evaluation. The relative site of attachment of the cervical pedicle has not been previously described. OBJECTIVE: To describe the site of the pedicle attachment to the VB in the subaxial cervical spine. METHODS: Cervical spine computed tomography scans without any structural, degenerative, or traumatic pathology as read by a board-certified neuroradiologist during 2021 were reviewed. Multiplanar reconstructions were created and cross-registered. The pedicle's attachment to the VB was measured relative to the VB height using a novel calculation system. RESULTS: Fifty computed tomography scans met inclusion criteria yielding 600 total pedicles between C3-T1 (100 per level). The average patient age was 26 ± 5.3 years, and 21/50 (42%) were female. 468/600 (78%) pedicles attached in the cranial third of the VB, 132/600 (22%) attached in the middle third, and 0 attached to the caudal third. The highest prevalence of variant anatomy occurred at C3 (36/100 C3 pedicles; 36%). CONCLUSION: In the subaxial cervical spine, pedicles frequently attach to the top third of the VB, but significant variation is observed. The rate of variation is highest at C3 and decreases linearly with caudal progression down the subaxial cervical spine to T1. This is the first report investigating this morphological phenomenon.

A Systematic Review of Clinical Signs Associated With Degenerative Conditions and Morphological Variations of the Equine Caudal Neck.

Conditions of the equine caudal neck (C5-C7) are thought to be associated with various clinical signs. However, little investigation has been undertaken to isolate clinical indicators associated with specific conditions of the equine caudal cervical spine. This systematic review aimed to evaluate associations of clinical signs with anatomical malformation of caudal cervical vertebrae, spinal cord compression of the caudal cervical spine, and arthropathy of the caudal cervical articular process joints (APJs). A literature search was carried out using Google Scholar in accordance with PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analyses) guidelines. Studies were selected for inclusion in this systematic review according to a set of inclusion criteria, resulting in a small group of eligible studies (n = 12) that addressed clinical signs associated with caudal cervical spine conditions in horses. The results of the included studies indicate that there are grounds for further investigation of clinical presentations of specific conditions of the equine caudal neck such as anatomical variations, myelopathy, and alteration to the APJs.

Superior Laryngeal Nerve Palsy After Anterior Cervical Diskectomy and Fusion: A Case Report and Cadaveric Description.

BACKGROUND AND IMPORTANCE: Superior laryngeal nerve (SLN) injury after high cervical dissection can result in changes in vocal pitch due to cricothyroid denervation and dysphagia with aspiration risk because of decreased sensation of the supraglottic larynx. CLINICAL PRESENTATION: We describe a 69-year-old singer with cervical spondylotic myelopathy who underwent elective C3/4 and C4/5 anterior cervical diskectomy and fusion. Postoperatively, the patient reported changes in his voice, most noticeable with higher registers. A number of studies confirmed severe right superior laryngeal neuropathy. A cadaveric description included to highlight anatomic relationships critical in minimizing risk of SLN injury during an anterior cervical diskectomy and fusion approach. CONCLUSION: The SLN is a critical structure vulnerable to iatrogenic injury during high cervical dissections for anterior approaches to the spine. Therefore, it is critical for spine surgeons to have a firm understanding of SLN anatomy for these approaches.

Morphological variations in the transverse foramen of the axis in Japanese serows (Capricornis crispus).

The presence of transverse foramina in the axes of Japanese serows, a special national natural treasure in Japan, has been reported to be unstable, but other variations are unknown. In this study, we analysed the shape, cross-sectional area, length, and volume of the transverse foramen in the axes of 19 specimens using gross anatomy and computed tomography (CT) scan. There were four types in the transverse foramen: type 1, having the transverse foramina; type 2, having two cranial openings; type 3, sifting a caudal opening to the ventral side of the transverse process; and type 4, having no transverse foramina. Although the transverse foramina showed different types on the left and right sides in several specimens, there were no statistically significant differences in the length and volume. This variation may be related to running patterns of the vertebral artery penetrating the transverse foramina. Two goats without the transverse foramina were examined to infer a running pattern of the vertebral artery instead of Japanese serows. The vertebral artery in the goats branched in two directions (spinal and muscle), between the axis and the third cervical vertebra. This passage of the goat vertebral artery might be presumed in type 4 of Japanese serows. This study reveals the instability of the transverse foramina in the axes of Japanese serows and provides new data to compare the axes of other ruminants.

A new concept of the fiber composition of cervical spinal dura mater: an investigation utilizing the P45 sheet plastination technique.

PURPOSE: Few reports have been published regarding the microanatomy of the dura mater located at the craniovertebral junction (CVJ). In clinic, the precise microanatomy of the CVJ dura mater would be taken into account, for reducing surgical complications and ineffective surgical outcomes. The main objective of the present investigation was to further elucidate the fiber composition and sources of the cervical spinal dura mater. METHODS: The formalin-fixed adult head and neck specimens (n = 21) were obtained and P45 plastinated section method was utilized for the present study. The fibers of the upper cervical spinal dura mater (SDM) were examined in the P45 sagittal sections in the CVJ area. All photographic documentation was performed via a Canon EOS 7D Mark camera. RESULTS: The posterior wall of the SDM sac at CVJ was found to be composed of stratified fibers, which are derived from three sources: the cerebral dura mater, the occipital periosteum, and the myodural bridge (MDB). The proper layer of the cerebral dura mater passes over the brim of the foramen magnum and enters the vertebral canal to form the inner layer of the SDM, and the fibers originating from the periosteum of the brim of the foramen magnum form the middle layer. The fibers of the MDB are inserted into the SDM and form its outer layer. It was found that the total number of fibers from each origin varied in humans. CONCLUSION: At the CVJ, the posterior wall of the SDM is a multi-layered structure composed of three different originated fibers. The cerebral dura mater, the periosteum located at the brim of the foramen magnum, and MDB contribute to the formation of the SDM. The present study would be beneficial to the choice of surgical approach at the CVJ and the protection of the SDB.

Implicaciones clínicas asociadas a las variantes anatómicas del número y forma del foramen transverso en vértebras cervicales secas / Clinical implication of anatomical variants of number and shape of the transverse foramen in dry cervical vertebrae

RESUMEN: Las vértebras cervicales presentan como característica distintiva un foramen transverso bilateral, cualquier modificación en la embriogénesis, genera variantes del tamaño, número y forma, lo que puede conllevar diversos problemas neurológicos. Realizamos un estudio observacional y descriptivo de vértebras cervicales, en el que se observó y clasificó el número, la forma y lateralidad de los forámenes transversos principales y accesorios, en una muestra disponible en el anfiteatro de la Universidad de Boyacá, Colombia. Se tomó registro fotográfico especializado. De las 13 vértebras con foramen transverso accesorio, seis fueron unilaterales y siete bilaterales, predominando la forma ovalada con dirección a la derecha. El nivel más común de duplicación fue C4 (dos incompletos y siete completos) y el menos común fue C1, C2 y C5. El conocimiento de estas variantes anatómicas por parte de radiólogos, cirujanos y neurocirujanos, contribuye a la planeación de los abordajes quirúrgicos, favoreciendo la instrumentación de la región cervical y evitando iatrogenias o desenlaces fatales.

SUMMARY: Cervical vertebrae present bilateral transverse foramen, any modification in embryogenesis, generates variants of size, number and shape, which are associated with various neurological problems. Descriptive and observational study of cervical vertebrae, of the number, shape and laterality of the main and accessory transverse foramina were observed and classified. Specialized photographic record was taken. Of the 13 vertebrae with an accessory transverse foramen, six were unilateral and seven bilateral, the oval shape prevailing in the direction to the right. The most common level of duplication was C4(two incomplete and seven complete) and the least commun was C1, C2 and C5. The knowledge of these anatomical variants by radiologists, surgeons and neurosurgeons, contributes to the planning of surgical approaches, favoring the instrumentation of the cervical region avoiding iatrogenic and fatal outcomes.

CT anatomy of cervical vertebrae of Asian elephant (Elephas maximus).

BACKGROUND: Elephants are currently the largest mammals on earth. A comprehensive examination of the anatomy of this animal to diagnose various disorders is required. In addition, due to the heavy head of these animals, adaptations have been made in the anatomical structure of the neck that is worth studying. OBJECTIVE: This study aimed to investigate a standard morphologic and morphometric description of the elephant cervical spine. Another aim of this study was to compare the changes in the cervical skeleton of elephants with horses and cattle. METHODS: For this study, the cervical vertebrae of the Asian elephant, cattle and horse were examined. CT Images were obtained using Somatom Spirit II CT Machine. Statistical analysis was done by SPSS 24 software. RESULTS: Two dorsal tubercles and a groove between them were observed on the dorsal arch of the atlas vertebra of the Asian elephant. In elephant samples, the variation of vertebral body height, spinous process height, transverse process width, vertebral body length and vertebral foramen volume indices were statistically significant. The volume of the vertebral foramen in the elephant decreases in the second vertebra compared to the first vertebra, decreases in the third vertebra, decreases in the fourth, increases in the fifth, decreases in the sixth and increases in the seventh. CONCLUSIONS: In this study, the structure of the cervical vertebrae of the Asian elephant was examined, and certain features were observed. One of the main features was the reduction of the length of the vertebrae, which leads to the decrease of the ratio of neck length to the size of the body. This condition can be due to the high weight of the head in the elephant. To maintain this weight, it is necessary to reduce the length of the neck and confer less mobility.